Magnetics Importance for Electric Vehicles at Cenex-LCV

Electric Car

Magnets and magnet assemblies, both essential for transport electrification, are the focus for Bunting on stand C4-106 at Cenex-LCV (UTAC Millbrook Proving Ground, Bedfordshire, UK, 23rd to 24th September 2021).  In particular focus is the technique of magnetizing magnet assemblies after construction, which offers a wide range of benefits including accuracy and safety. The LCV…

Read More

Post Assembly Magnetising at Magnetisation & Measurement Event

Bunting Magnetics Europe Ltd Magnetiser and Magnetising Equipment

Post assembly magnetisation of permanent magnet rotors is one of several papers being presented at the UK Magnetics Society’s ‘Magnetisation & Measurement’ online event on 28th April 2021. The Bunting-sponsored one-day event focuses on the magnetisation of magnets in isolation and in assemblies such as motors, and the associated measurement of magnetic fields. Post Assembly…

Read More

ArabPlast 19 & Middle East Plastics Industry Gateway

Bunting Magnetics Dubai

Successful ArabPlast 18 for Bunting Magnetics The weather was a little warmer in Dubai than the UK for this year’s ArabPlast 2019.  The 4-day exhibition focused on the Middle East plastics, petrochemicals and rubber industries.  The geographical location of exhibitors was as wide and varied as their products.  This proved ideal for the large number…

Read More

Export Orders Secured at Ceramitec 2018

Electro Magnetic Filters Ordered, Ceramitec ’18 Bunting’s first time as an exhibitor at Ceramitec 2018, the leading exhibition for ceramics and ceramic technology held in Munich, Germany (April 10-13), proved to be a huge success. “We did not expect to secure orders on the stand,” said Dave Hills, Bunting’s Head of Sales, “and were thrilled…

Read More

Prime Location for Bunting at RWM 2018

Magnetic Separators Greet Visitors at RWM Bunting Magnetics and Master Magnets have booked the stand greeting visitors as they enter through the main entrance at this year’s RWM recycling and waste exhibition (NEC, Birmingham, UK 12-13 September 2018). “After last week’s RWM Digital Marketing Masterclass in London, we got together with Nick and the new…

Read More

RWM17 Exhibition Review

Bunting Magnetics Review UK’s Waste & Recycling Show On the 12th to 14th September 2017, the focus for the UK’s recycling and waste industry was the RWM 2017 exhibition (NEC, Birmingham).  Bunting Magnetics, along with their acquired business Master Magnets, were demonstrating metal separation on an Eddy Current Separator (for non-ferrous metals) and Stainless Steel…

Read More

Export Success at FIP Solution Plastique Exhibition

Bunting Magnetics Support BMS France at Plastics Show Dave Hills, Bunting Europe’s Head of Sales, was on the stand of local distributor, BMS France for the duration of the major annual international plastics exhibition, FIP Solution Plastique, held in Lyon, France between 13th and 16th June 2017. Dave gave us this report: “Last week [13th…

Read More

Metal Detectors at FIP Solution Plastique

Bunting Support BMS France at Major Plastics Show Bunting Magnetics Europe distributor, BMS France, is exhibiting Metal Detectors and Magnetic Separators on stand D16/E13 at the FIP Solution Plastique show in Lyon, France (13th to 16th June 2017).  FIP Plastique Plastique has been the number 1 show for the plastics sector in France for over…

Read More

Positive Vibes For Recycling at Waste 17

Interest in Magnetic Separators & Eddy Current Separators Despite the rain and the General Election, Waste 17 proved to be a great success on 8th June 2017.  The Waste 17 exhibition was held at Manchester United’s ‘Theatre of Dreams’, their Old Trafford football ground, with both indoor and outdoor exhibits. “We were really excited [about…

Read More

Bunting and Master Magnets Headline Sponsors of Waste 17

Metal Separation Technology Operating at Waste 17 Bunting Magnetics Europe and Master Magnets are the headline sponsors of this year’s Waste 17 recycling show being held at the Old Trafford Football Ground in Manchester on Thursday 8th June.  An operating Eddy Current Separator and Stainless Steel Separator will be separating metals on stand A40 and we welcome…

Read More