Magnetising Technology at Coiltech Italia 2023

At Coiltech Italia 2023 (20-21 September, Pordenone, Italy), Bunting is showcasing advanced magnetising equipment and new magnetising techniques for enhanced magnetic component performance on stand 6-D30.  Recent developments include the development of an industrial magnetiser for the Ford Motor Company’s electric Transit project. The Coiltech Italia conference and exhibition focuses on materials and machinery for…

Read More

Industrial Magnetiser for Ford Electric Vehicle Application

Bunting Industrial Magnetiser for automotive application

Bunting was successful in winning a bid to supply Ford Motor Company with an in house designed and built bespoke industrial magnetising system for use in a prototype build area.  The industrial magnetising system charges and tests a magnet rotor assembly, which forms part of a new Transit electric power unit presently under development. Over…

Read More

Cenex-LCV 2022 Review

Bunting at Cenex-LCV 2022

Cenex-LCV is the UK’s premier low carbon vehicle event, held at UTAC in Bedfordshire, UK (7-8 September 2022).  Our Matthew Swallow, our Technical Product Manager reviews the 2022 event. Promoting a Low Carbon Vehicle Future “The Low Carbon Vehicle Exhibition of 2022 perfectly lived up to its name. This year there were vehicles using every…

Read More

Stray Magnetic Fields and Safety

Stray Magnetic Fields and Safety

Bunting is at the heart of the electrification program of the world’s vehicles.  By producing magnetising systems that allow for genuinely error-free assembly and providing 100% inline testing, Bunting supports automotive and aerospace programmes looking to create new modes of travel and improve efficiency.  Bunting is proud to support this sustainable engineering activity to provide…

Read More

Post-Assembly Magnetisation at Cenex LCV

Magnet Rotor Magnetisation Montage

Post-assembly magnetisation of permanent magnet rotors is the most cost effective and accurate way to produce these vital components for electric vehicle motors.  Bunting is promoting such post-assembly magnetising manufacturing techniques on stand C4-607 at the Cenex LCV Event (7-8 September, UTAC, Millbrook, UK). The Cenex LCV Event focuses on low carbon and fuel cell…

Read More

Remote Magnetiser Monitoring and Problem Solving

Bunting BMC Industrial Magnet Charger

Bunting has designed, manufactured, and supplied a large Magnetiser and light-guarded Magnetising Fixture to an Italian electronics company.  Prior to despatch, the equipment was subject to a comprehensive two-day factory acceptance test with the customer. During the factory acceptance tests (FAT), Bunting’s commissioning engineers liaised with every stakeholder at the customer, checking on the operating…

Read More

Advanced Magnetising Technology at Coiltech Deutschland 2022

Bunting Coiltech Italia 2021

Following the success of attending Coiltech Italia in 2021 and a record year for magnetising equipment sales, Bunting is exhibiting at the first Coiltech Deutschland (6-7 April 2022).  The Coiltech Deutschland conference and exhibition focuses on materials and machinery for the production and maintenance of electric motors, generators, power and distribution transformers, industrial transformers and…

Read More

Magnetiser Reaches 1.29 Million Discharges

Magnetiser and its 1.29 million discharges

In 1997, Bunting’s Group Magnetics Engineer Chris Riley commissioned a 30kA 4kj Magnetiser at Bunting’s European magnetic manufacturing and design headquarters in the UK.  The bespoke Magnetiser charged a range of specialist magnets and magnet assemblies. Since the original installation, Bunting’s engineering team has annually serviced and calibrated the Magnetiser.  Such a proactive approach to…

Read More

Record Year for Magnetising Equipment Sales

Magnetising Equipment Sales

Sales of Magnetising Equipment in 2021 hit an all-time record high for Bunting’s Berkhamsted, UK operation.  The success is the result of ongoing development of a wide range of bench-top and industrial magnetisers, as well as magnet setters. Magnetiser Development Bunting is unique as a company designing and manufacturing both magnetising equipment and magnets.  The…

Read More

Magnetising Fixture Winding for Magnet Ring Sensor Project

Magnetising fixture inding

Bunting’s engineering team work with companies on many magnet product designs, from concept through to manufacture.  This project focused on the feasibility of designing, manufacturing, and supplying a permanent magnet ring to produce a sinusoidally varying flux density waveform for a sensor application.  A sine wave or sinusoid is a mathematical curve that describes a…

Read More